Digital electromagnetic flow meter water for textile industry

4-20 output 50mm conductive liquid magnetic water meter flow meters,6 inch rs485 Digital wireless water flow meter,Bulk clean water meter dn 100 ce electromagnetic flow meter,China 420ma output water flow meter manufacturer 

Working principle

        Electromagnetic flow meters are flowmeters that measure flow according to Faraday's law of electromagnetic induction. Electromagnetic flowmeters have the advantage of minimal pressure loss and a large range of measurable flow rates. The ratio of the maximum flow rate to the minimum flow rate is generally more than 20:1. The applicable industrial tube diameter is wide, up to 3 meters. The output signal and the measured flow rate are linear, and the accuracy is high. The conductivity can be measured ≥5μs/cm. Acid, alkali, salt solution, water, sewage, corrosive liquids, and fluid flow of mud, pulp, pulp, etc. However, it cannot measure the flow of gas, steam, and pure water.

 Bulk clean water meter dn 100 ce electromagnetic flow meter
Electromagnetic flow meter product features:
         Features:
        1. There is no movable parts in the electromagnetic flowmeter, no loss pressure, simple structure, woke reliable;
        2. The measurement accuracy is not affected by the change of the measured medium’s pressure, density (including liquid-solid two-phase),temperature, viscosity and other physical parameter;
        3. Moisture proof and waterproof performance is good. Suit for setting up and being used underground or wet environments;
        4. Compare with other flowmeter, its advantage: big measurement range , low demand in straight pipe, high accuracy;
        5. Low power consumption, one set flowmeter power consumption less than 20W.