Electromagnetic Flowmeter

Magnetic flowmeter parameters:

3.3 Structure: Waterproof structure, integrated and split type · Connection form: DN15-DN1000 for flange type · Pressure rating: DN15-DN1000 0.25mpa-4mpa · Fluid temperature classification: ≤150℃ or ≤80℃ ·Flow meter body material ： ·Surface coating: stainless steel sandblasted, coating color is sky blue · Electrode material: 316L, Hastelloy B, Hastelloy C, titanium, tantalum, etc. · Grounding ring material: 316L, Hastelloy B, Hastelloy C. Titanium, tantalum, etc. · Electrode structure (plug-in type): 25～DN40: standard electrode (corner electrode) DN50～DN1000: standard electrode (bowl electrode) ·Protection grade: IP65, IP68

DN25～DN1000 flange connection, installed on the pipeline flange at the user site.

3.4 Converter

·Excitation system: low frequency huge traveling wave excitation

·Power supply: 220VAC, 60HZ or 24VDC or lithium battery

·Output signal: 4～20mADC, pulse output (pulse), RS485 communication, etc.

·Flow range setting function: Set volume flow by setting volume unit, time unit, flow value and diameter (meter measuring tube diameter). quality

Volume flow and special volume units can also be set.

Volume units: cubic meters, liters, cubic centimeters, gallons, etc.

Time unit: second, minute, hour, day

Instrument diameter: mm, inches

·Normal working conditions:

Ambient temperature: 5℃～60℃ (with LCD)

Environmental humidity: 5-95%

Power supply voltage: 220VAC, 60HZ or 24VDC or lithium battery

·Pressure strength: add 500V voltage between the power terminal and the ground terminal for 1 minute,

·Insulation resistance: The insulation resistance between the power terminal and the shell, and between the output terminal and the shell is greater than 20 megohms.

·Accuracy: ±0.5%

·Repeatability: 0.25%

·Liquid conductivity ≥5μs/cm