Pressure measuring electromagnetic flowmeter water flow meter

Pressure measuring electromagnetic flowmeter water flow meter

   The electromagnetic flowmeter is manufactured using international leading technology. The electromagnetic flowmeter is composed of H200B electromagnetic flow converter and pressure measuring electromagnetic flow sensor (integrated or separated), used to measure various conductive liquids or liquid-solid two in closed pipelines. The volume flow of the phase medium. The connection form of the sensor is flange type.
    The electromagnetic flowmeter has been widely used in industrial sectors such as chemical industry, metallurgy, steel, coal, water conservancy, water supply and drainage, environmental protection, cement, printing and dyeing and chemical fiber.
Features:
   1. This electromagnetic flowmeter has a pressure measurement function, which can better measure the pipeline pressure.
2. There are no moving parts in the electromagnetic flowmeter, no pressure loss, simple structure and reliable operation.
   3. The measurement accuracy is not affected by changes in physical parameters such as pressure, density (including liquid-solid two-phase), temperature, and viscosity of the measured medium.
   4. The overall structure makes the measuring tube and the shell integrated into one, with good moisture and waterproof performance, suitable for installation and use in underground or humid environments.
   5. Compared with other flow meters, it has wide measurement range, short straight pipe section, high measurement accuracy,
   6. Low power consumption, the power consumption of the complete instrument is less than 20W.
Main Specifications
  Nominal diameter: DN15～DN2000
  Accuracy grade: ±0.2%, ±0.3%, ±0.5% (indicating error)
Measuring range (velocity): 0.01m/s～15m/s
Measuring medium conductivity: greater than 5μS/cm
Nominal pressure: 0.6MPa, 1.0MPa, 4.0MPa
Shell protection grade: IP65, IP67, IP68
Electrode material: 316L, Hastelloy B, Hastelloy C, titanium Ti, tantalum Ta, stainless steel coated tungsten carbide, platinum-iridium alloy, special
Lining material: neoprene, polyurethane rubber, natural rubber, nitrile rubber,
          PFA, PTFE, FEP
Connection method: flange [flange according to standard GB/T9119-2010 parameters]
Ambient temperature: -10℃～50℃
Power supply: AC220V/DC24V/DC3.6V
Flowmeter output signal: 4～20mA, 0～5KHZ, RS485, upper and lower limit alarm, etc. (RS232, MODBUS, HART, PROFIBUS-DP, etc. optional)