Threaded rotary vane wheel wet water meter

The working principle of the rotary multi-jet water meter is basically the same as that of the single-jet water meter. It is through the distribution of the impeller box, and the multi-jet water flow is cut from the water inlet of the impeller box to the impact impeller, so that the axial impact of the water flow on the impeller The balance is obtained, the wear of the impeller supporting part is reduced, and the influence of water meter installation and scaling on the water meter error is reduced from the structure, and the overall performance is significantly higher than the single jet water meter.
Warranty:1 year
Certification:CE, ISO, MID, etc.
Customized support:OEM
Place of origin:Henan, China
Model Number:LXS-32E
Type:Multi-jet meters
Product name:Factory price 32mm Rotar wing wet dial water meter
size:32mm
color:blue or customized
type:wet dial
flowrate range:Q1~Q3
ambient temperature:5℃~55℃
ambient humidity:(0~100)%RH
water pressure:0.03~1MPa
pressure loss:≤0.063MPa

 
Main features:

1. Water meter movement, performance, size, etc. are equivalent to similar metal shell water meters;
2. Environmental protection design, stainless steel case, using high quality 304 stainless steel, no pollution;
3. Beautiful appearance;
4. Dry and wet options are available.
Application and performance:

Application:

It is used to measure the amount of drinking cold water flowing through the water pipe in a household or a residential unit.

 

Characteristic:

1. The structure is simple.

2. Easy to manufacture and maintain, low cost.

3. Durable, low water quality requirements.

4. The error is easy to adjust.

5. The flow ratio is relatively large.

6. The requirements for straight pipe section are low.

Service conditions:

The water pressure shall not be greater than 1.0MPa
The cold water meter shall not exceed 30 degrees
Hot water not exceeding 90C meter