mass flow meter manufacturer suppliers sensor manual

mass flow meter manufacturer suppliers,honeywell fci e&h mks thermal mass flow meter-kurz micro motion abb coriolis mass flow sensor manual

technical parameter
Applicable medium: all gases compatible with stainless steel
Measuring range: 0.05-120m/s
Working temperature: -40℃-510℃
Ambient temperature: -40℃-85℃, humidity less than 90%RH
Pressure drop:
For pipes with a diameter greater than or equal to 3 inches, the power requirements can be ignored:
18-30VDC maximum 600mA
180-230VAC max 2.5W
100VAC max 3.15W
Output signal: linear 4-20mA proportional to mass flow rate 4-20mA linear proportional to temperature
Accuracy: 1% of reading ±0.5% of full scale
Repeatability: ±0.2%F.S
Pressure resistance: 4.2MPa
Response time: ≤850ms
Shell material: die-cast aluminum, A2/A4 optional
Probe material: 316L, tantalum, titanium, etc. optional
Ball valve: 316L
Compression connector: 316L/304
France: 316L/304
Alarm output: relay normally open contact capacity 220AC/3A or 24VDC (only for the alarm output of the flow value), temperature output is possible
Display: widescreen LCD display, parameters and variables can be set through the buttons on the panel (with password protection)
Protection level: IP65